13ENGLISH
Overview of programmes
Overview of programmes
Overview of programmes
You can find an overview of the programmes that can be set
here.
Start a programme:
→Fig.
21
Set the start time for a programme:
→Fig.
22
PROGRAMME 1) PROGRAMME DURATION IN H:MIN
2) ENERGY CONSUMPTION IN KWH
3) WATER CONSUMPTION IN L
PROGRAMME SEQUENCE
Intensive 70°
● 1) 2:25-2:30
● 2) 1.150-1.250
● 3) 10.5-13.5
Intensive:
● Pre-Rinse
● Cleaning 70°C
● Intermediate rinse
● Final rinse 50°C
● Dry
Auto 45-65°
● 1) 1:40-2:40
● 2) 0.680-1.300
● 3) 7.0-15.5
Sensor-controlled:
● Optimised by sensors depending on
the soiling level of the washing water
Eco 50°
● 1) 3:55
● 2) 0.747
● 3) 9.5
Most economical:
● Pre-rinse
● Clean 50°C
● Intermediate rinse
● Final rinse 66°C
● Drying
Quiet 50°
● 1) 4:00
● 2) 0.800
● 3) 10.5
Reduced noise:
● Pre-Rinse
● Cleaning 50°C
● Intermediate rinse
● Final rinse 35°C
● Dry
Glass 40°
● 1) 1:40-1:45
● 2) 0.750-0.800
● 3) 11.1-13.7
Particularly gentle:
● Pre-Rinse
● Cleaning 40°C
● Intermediate rinse
● Final rinse 50°C
● Dry
Quick 65°
● 1) 0:15
● 2) 0.050
● 3) 4.0
Time-optimised:
● Cleaning 65°C
● Intermediate rinse
● Final rinse 69°C
● Dry
Quick 45°
● 1) 0:35
● 2) 0.710
● 3) 10.5
Time-optimised:
● Cleaning 45°C
● Intermediate rinse
● Final rinse 50°C
PreRinse
● 1) 0:15
● 2) 0.050
● 3) 4.0
Cold rinse:
● Pre-rinse
Machine Care
● 1) 3:55
● 2) 0.747
● 3) 9.5
Use only if appliance is unloaded.
Machine Care 70°C
Information for test institutes
Test institutes are provided with information for comparabil-
ity tests, e.g. according to EN60436.
These are the conditions for conducting the tests, however
they are not the results or consumption values.
E-mail enquiries to: dishwasher@test-appliances.com
The product number (E-Nr.) and the production number (FD)
are required here. They can be found on the rating plate on
the appliance door.
To download the full document, visit www.ikea.com