Need help?Do you have a question about the IKEA KUNGSBACKA and is the answer not in the manual?
General| Color | Anthracite |
|---|---|
| Width | 60 cm |
| Package Quantity | 1 |
| Material | Particleboard |
| Category | Kitchen cabinet front |
Prepare the KUNGSBACKA profile by cutting it to the required length using a saw and miter box for installation.
Secure the mounting brackets to the KUNGSBACKA profile using screws, observing specific measurements for correct placement.
Mount the prepared KUNGSBACKA profile onto the bottom of the cabinet modules using the provided clips and screws.
Align the KUNGSBACKA profile on the top edge of the cabinet modules, ensuring correct placement and measurements.
Drill pilot holes into the cabinet for securing the KUNGSBACKA profile, following specified dimensions for accurate attachment.
Fasten the KUNGSBACKA profile to the cabinet using screws, completing the attachment process for stability.
Place the KUNGSBACKA profile onto the top of the cabinet modules, checking alignment and measurements for proper installation.
Create pilot holes on the cabinet for attaching the KUNGSBACKA profile, adhering to precise measurements for secure mounting.
Secure the KUNGSBACKA profile to the cabinet using screws, ensuring a firm and stable installation is achieved.
To Next Page
