5019 618 33085/A
LI25DA
The hood is designed for use in “Extractor version” or in
“Filter version”
Extractor version
(see symbol in installation handbook)
fumes are extracted and expelled to the outside through a
fumes exhaust hose (not supplied) fixed to the collar of the
hood.
In accordance with the exhaust hose purchased, provide a
suitable fixing system to secure it to the collar.
Warning: If already installed, remove the carbon filter/s.
Filter version
(see symbol in installation handbook)
Air is filtered through a carbon filter/s and recycled into the
surrounding environment.
Warning: check that air recirculation is facilitated (to this end,
carefully follow the instructions given in the installation
handbook)
Warning! If the hood does not have a carbon filter/s, order
one/them and fit it/them before use.
The hood comes provided with hardware (e.g.: screws and/or
plugs) suitable for most walls/ceilings. However, it is necessary
to contact a qualified technician to ensure suitability according
to the type of wall/ceiling. The wall/ceiling must be strong
enough to take the weight of the hood.
Very heavy product; hood handling and installation
must be carried out by at least two persons.
FIN
S
N
DK
CZ SK HPL
RUS
BG RO
IF NL E PGBD GR
To Next Page
Loading...
