5019 618 33123
The hood is designed for use in “Extractor version” or in
“Filter version”
Extractor Version
(see symbol in installation handbook)
fumes are extracted and expelled to the outside through a
fumes exhaust hose (not supplied) fixed to the collar of the
hood.
In accordance with the exhaust hose purchased, provide a
suitable fixing system to secure it to the collar.
Warning: If already installed, remove the carbon filter/s.
Filter Hood
(see symbol in installation handbook)
Air is filtered through a carbon filter/s and recycled into the
surrounding environment.
Warning: check that air recirculation is facilitated (to this end,
carefully follow the instructions given in the installation
handbook)
Warning! If the hood does not have a carbon filter/s, order
one/them and fit it/them before use.
The hood comes provided with hardware (e.g.: screws and/or
plugs) suitable for most walls/ceilings. However, a qualified
technician is needed to make sure that such hardware is
suitable for your wall/ceiling. The wall/ceiling must be strong
enough to take the weight of the hood.
Extremely heavy product; hood handling and
installation must be carried out by two or more
persons.
IFINNL P GR
E
S
N
DK
D
F
GB
CZ SK H
PL
RUS
BG
RO
To Next Page
Loading...
