IKEA LUFTIG Instruction Manual

7
english
What to do if...
PROBLEM POSSIBLE CAUSE SOLUTION
Appliance not stable The appliance is not correctly installed
Respect the Installation instruction enclosed
to the appliance.
Appliance is not in horizontal position The appliance is not correctly installed
Respect the Installation instruction enclosed
to the appliance.
Performance in terms of oil capture
arent satisfying
Oilandgrease on metallters
Respectthecleaningfrequency ofltersas
described in the user manual
Appliance doesn't work The appliance is not correctly connected
Verify that the main cable is connected to
the motor group or the plug is connected
to the socket
The lamp is not working Thelampisnotcorrectly xed
Verify that the lamp is screwed properly to
the lampholder
The lamp is not working The lamp is faulty Replace the lamp bulb
If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution
to the problem yourself, contact the After Sales
Service.
If you operated the appliance wrongly, or
the installation was not carried out according
to the Assembly instructions, the visit from the
After Sales Service technician or dealer may not
take place free of charge, even during the
warranty period.
Technical data
Dimensions
Width
Height
Depth
598 mm
Min.620 mm - Max.995 mm
471 mm
Lamp (Total power) 56 W
Total rating 181 W
Type of lamp and socket Halogen 28 W E14
AirowMax -Exhaust 400 m
3
/h
Noice Max - Exhaust 64 dB(A)
AirowMax -Recirculation 260 m
3
/h
Noice Max - Recirculation 70 dB(A)
Installation Min. Height - Gas Hoob 650 mm
Installation Min. Height - Electric Hoob 500 mm
This appliance has been designed,
manufactured and marketed in compliance with
the E.E.C. Directives.

IKEA LUFTIG Specifications

General

Width	60 cm
Voltage	220-240V
Number of grease filters	1
Light bulb included	Yes
Bulb type	LED
Material	Stainless steel
Frequency	50 Hz
Type	Wall-mounted
Filter type	Grease