Need help?Do you have a question about the IKEA MAXIMERA and is the answer not in the manual?
Begin the assembly process by following the instructions for Step 1.
Complete steps 2 and 3, focusing on attaching the drawer sides and base panel.
Follow steps 4 and 5 to attach the necessary mounting brackets to the drawer structure.
Execute steps 6 and 7 to connect the primary drawer runner components.
Perform steps 8 and 9 to ensure the proper integration of the drawer runners.
Follow steps 10 and 11 to install the structural base supports for the drawer.
Step 12 details the crucial process of attaching drawer runners to the cabinet body.
Complete step 13 by making the final connections to the cabinet structure.
Steps 14 and 15 cover the insertion of the drawer and attachment of front covers.
Step 16 focuses on the process of attaching the drawer's front panel.
Steps 1 and 2 on page 18 detail further drawer runner preparation and attachment.
Step 3 on page 19 completes the drawer runner assembly for the second phase.
To Next Page
General