Why is there foam in my IKEA MEDELSTOR Dishwasher?
If you notice unusual foam during washing in your IKEA Dishwasher, make sure you are only using detergent specifically designed for dishwashers. Also, there may be a leak in the rinse aid dispenser, in that case contact an Authorised Service Centre.
Why won't the program start on my IKEA MEDELSTOR Dishwasher?
If the program on your IKEA Dishwasher isn't starting, first make sure the appliance door is completely closed. If a delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes about 5 minutes.
How to remove limescale from my IKEA MEDELSTOR?
To address limescale deposits in your IKEA Dishwasher, first check the salt level and refill if the indicator is on. Ensure the salt container cap is tightly closed. Also, your tap water may be hard, and even when using multi-functional tabs, use salt and set regeneration of the water softener. If limescale persists, clean the appliance with suitable cleaners or try a different detergent. You can also contact the detergent manufacturer for advice.
Why is my IKEA MEDELSTOR Dishwasher not drying properly?
Several factors can affect drying performance in your IKEA Dishwasher. Tableware left too long in a closed appliance may not dry well. Ensure there is enough rinse aid, adjusting the dispenser to a higher level if needed. Note that plastic items may require towel drying. For optimal drying, activate the DryPlus option and set AutoOpen. It's also recommended to always use rinse aid, even with multi-tablets.
Why is my IKEA MEDELSTOR damaging my tableware?
If your tableware is coming out of the IKEA Dishwasher dull, discolored, or chipped, ensure that only dishwasher-safe items are being washed. Load and unload the baskets carefully. Place delicate items in the upper basket.
Why the IKEA MEDELSTOR Dishwasher programme does not start?
If your IKEA Dishwasher programme does not start, make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance may also be recharging the resin inside the water softener, which takes approximately 5 minutes.
What does it mean if my IKEA MEDELSTOR shows error codes i41 - i44?
If your IKEA Dishwasher has a malfunction of the water level detection sensor, and the display shows i41 - i44, make sure that the filters are clean and switch the appliance off and on.
Why is there rust on my IKEA MEDELSTOR Dishwasher cutlery?
If you find rust on cutlery in your IKEA Dishwasher, there might be too much salt in the water. Also, avoid placing silver and stainless steel cutlery together in the dishwasher.
Why does my IKEA MEDELSTOR keep stopping and starting?
It is normal for the IKEA Dishwasher to stop and start during operation. This process helps to provide optimal cleaning results and save energy.
Why is the inside of my IKEA Dishwasher wet?
A wet interior in your IKEA Dishwasher is not a defect. It's caused by humidity in the air condensing on the walls.
General| Brand | IKEA |
|---|---|
| Model | MEDELSTOR |
| Category | Dishwasher |
| Language | English |
Guidance on safe use of the appliance by children and vulnerable individuals.
General safety precautions and intended use of the appliance.
Instructions for installation, electrical, water connection, and general use.
Information on internal lighting, service, product description, and disposal.
Overview of product features, components, and Beam-on-Floor indicator.
Explanation of the control panel display and indicator lights.
Details of available washing programmes and their specifications.
Information on optional features to enhance washing programmes.
Data on water and energy consumption for different programmes.
How to adjust water softener and rinse aid levels.
Configuration of sound, AutoOpen, and last programme memory.
Explanation of water hardness, its impact, and regeneration process.
Detailed management of specific features like rinse aid, sounds, and AutoOpen.
Steps to enter, navigate, and change appliance settings.
Initial setup steps including filling salt and rinse aid dispensers.
Steps for daily use, programme selection, options, delays, and cancellations.
Advice for optimal cleaning, drying, and appliance care.
Instructions and examples for loading the dishwasher baskets.
Instructions for cleaning filters, spray arms, and the appliance interior/exterior.
Solutions for common issues like failure to start or water problems.
Troubleshooting for specific faults, error codes, and noises.
Causes and solutions for poor washing, drying, and surface finishes.
Information on how to find the product number code.
Product specifications, dimensions, and electrical details.
Guidance on recycling and proper disposal of the appliance.
Details on guarantee coverage, exclusions, and legal aspects.
How to contact IKEA for service requests and clarifications.
List of IKEA service phone numbers and opening times by country.
To Next Page
