The IKEA MITTLED is a household LED cabinet lighting strip with a built-in sensor, designed for general lighting of indoor spaces, specifically for kitchen drawers. This product is certified and comes with a comprehensive guide for its assembly, connection, operation, transportation, storage, and disposal.
Function Description:
The MITTLED provides integrated LED lighting for cabinets and drawers, enhancing visibility and convenience in kitchen spaces. Its integrated sensor allows for automatic illumination when a drawer is opened, and it turns off when the drawer is closed. This functionality makes it an energy-efficient and practical lighting solution for areas where light is needed intermittently.
Important Technical Specifications:
- Source Voltage (direct current): 24V
- Maximal Total Capacity of the Lamp: 2W
- Bulb Socket Type: Built-in LED light source
- Operating Temperature: +5 to +40 °C
- Relative Humidity (not exceeding): 80%
- Product's Protection Rating: IP20
- Material: Aluminium, plastic
- Service Life: 25,000 hours
Usage Features:
Before using the MITTLED, it is crucial to read the manual carefully and keep it for future reference. The product is designed for indoor use only.
- Installation: Installation, dismantling, and maintenance must always be performed with the power supply disconnected to prevent accidents. The manual provides detailed visual instructions for mounting the light strip within a cabinet or drawer. It specifies the use of screws (part number 108445) for secure attachment.
- Connection: The LED driver and power supply cord are sold separately. The MITTLED must be connected to a safety transformer with a SELV (Safety Extra-Low Voltage) output. Only IKEA LED drivers suitable for this product should be used. The total wattage of all lamps connected to a single LED driver must not exceed the maximum power stated on that LED driver, and never more than 30W. This ensures safe and optimal operation of the lighting system.
- Operation: After proper installation and connection, inspect the product to ensure the integrity of the plug, socket, and cord before inserting the plug into the socket. The integrated sensor will then control the light, turning it on when a drawer is opened and off when it is closed.
- Safety Precautions:
- Do not operate the product if it has mechanical damage.
- Do not install or disassemble the product when the power is on.
- Avoid using chemically active or aggressive cleaning agents on the product.
- Do not overload the product.
- Regularly check the cord, transformer, and all other parts for damage. If any part is damaged, the product should not be used.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire must be destroyed.
- The light source contained in this luminaire can only be replaced by the manufacturer, its service agent, or a similarly qualified person.
- Troubleshooting: If the product does not work, first check the supply-line voltage and then the integrity of connected parts and lamps. If these steps do not resolve the issue, contact qualified specialists. All troubleshooting and repair work must be done with the power supply disconnected.
Maintenance Features:
- Cleaning: Before cleaning, always pull the plug from the socket. Wipe the product clean with a damp cloth, then dry it thoroughly with a clean cloth. This prevents moisture damage and ensures the longevity of the product.
- Transportation and Storage: The product should be transported and stored in its original packaging, taking precautions to prevent mechanical damage and exposure to atmospheric precipitation (e.g., rain, high humidity).
- Disposal: The MITTLED must be disposed of in accordance with local legal requirements. The crossed-out wheeled bin symbol indicates that the item should be separated from household waste for recycling. This helps reduce landfill waste and minimizes potential negative environmental and health impacts. For detailed information on disposal, contact your local IKEA store or recycling facility. The product contains no hazardous or harmful substances that would be released during its life cycle if operated according to the rules. The product can still be used after its service life if all safety information and instructions in the user manual are followed.
Need help?
General
To Next Page
