Cleaning Reminder
When the reminder appears, cleaning is recommended.
Use the function: Steam Cleaning Plus.
How to use: Descaling
Before you start:
Turn o the oven and wait
until it is cold.
Remove all accessories. Make sure that the water draw‐
er is empty.
Duration of the rst part: around 100 min
Step 1 Place the deep pan on the rst shelf position.
Step 2 Pour 250 ml of the descaling agent in the water drawer.
Step 3 Fill the remaining part of the water drawer with water to the maximum level un‐
til the signal sounds or the display shows the message.
Step 4 Select: Menu / Cleaning.
Step 5 Turn on the function and follow the instruction on the display.
The rst part of descaling starts.
Step 6 After the rst part is over, empty the deep pan and put it back on the rst shelf
position.
Duration of the second part: around 35 min
Step 7 Fill the remaining part of the water drawer with water to the maximum level un‐
til the signal sounds or the display shows the message.
Step 8 When the function ends, remove the deep pan.
When this function works, the lamp is o.
When descaling ends:
Turn o the oven. When the oven is cold, dry
the cavity with a soft cloth.
Leave the oven door open
and wait until the cavity is
dry.
If some limestone residue remains in the oven after descaling, the display prompts to
repeat the procedure.
Descaling reminder
There are two reminders which prompt you to descale the oven. You cannot disable the
descaling reminder.
ENGLISH
29
To Next Page
Loading...
