10
If the “COMFORT” temperature is set below the “ECO
NIGHT” temperature, the latter will be automatically
adjusted accordingly.
Press the “MODE“ selection key until the “ECO NIGHT”
icon appears on the LCD display.
Select the desired temperature by using the “+“ or “-“
keys.
The use of this operating mode is recommended for
night-time hours and when nobody is in the room for
more than 2 hours.
CHRONO (Pink LED light)
In “CHRONO” mode, you can select one of the three
preset “CHRONO”-thermostat programmes (“P1” or
“P2”) or the custom programme (“P3”).
The “P3” lets you set “COMFORT” or “ECO NIGHT” mode
over a 24 hour period for each day of the week.
Choice of programme (P1;P2;P3)
Press the “MODE” key until the
“CHRONO” icon is displayed.
Press the “MODE” and ”-” keys together
and hold them both down for at least
3 seconds. The programme code (“P1,”
“ P2” and “P3”) ashes.
Press the “+” or “-” keys to choose the
programme and press the “MODE” key
to conrm.
Once the desired programme is
selected, the “ASC” icon appears.
Press the “-“ key to deactivate or the
“+” key to activate the “ASC” function.
“ASC” functionality operates only in
“CHRONO” mode.
The “ASC” functionality enables you to adjust
from “ECO NIGHT” to “COMFORT” to reach the set
temperature by switching the appliance on in advance
to ensure that the “COMFORT” temperature is reached
by the set time. The adjustment time from “ECO
NIGHT” to “COMFORT” depends on dierent factors
such as dierence of temperature and room size. The
function can switch the appliance on up to 2 hours in
advance.
A number of days of data acquisition are required to
optimise the accuracy of the “ASC” function.
Preset Programme P1 Hours Mode
From Monday to Friday 0 - 6 ECO NIGHT
6 - 9 COMFORT
9 - 16 ECO NIGHT
16 - 23 COMFORT
23 - 0 ECO NIGHT
Saturday and Sunday 0 - 7 ECO NIGHT
7 - 23 COMFORT
23 - 0 ECO NIGHT
Preset programme P2 Hours Mode
From Monday to
Sunday
0 - 7 ECO NIGHT
7 - 23 COMFORT
23 - 0 ECO NIGHT
To Next Page
Loading...
