EasyManua.ls Logo

IKEA ORMANAS - Product Maintenance and Reset; Factory Resetting the Device; Care and Cleaning Guidelines; Technical Specifications and Safety

IKEA ORMANAS
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Care Instructions
Wipe clean with a damp
cloth. Never use abrasive
cleaners or chemical solvents
as this can damage the
product.
Save these instructions for
future use.
Technical data:
Type: L2112 ORMANÄS
Input: 24.0 VDC, 0.21 A, 5 W
Max lumen output: 640 lm
Radio range: 10 m in open
air.
Operating frequency: 2405-
2480 MHz
Output power: max 10 dBm
Manufacturer: IKEA of
Sweden AB
Address: Box 702, SE-343 81
Älmhult, SWEDEN
RF EXPOSURE
INFORMATION
According to RF exposure
regulations, under normal
operations the end user shall
refrain from being closer
than 20 cm from the device.
How to factory reset your
product
If the product does not
respond or if you want to
un-pair the product from a
steering device you might
have to make a factory
reset. The product is forced
to factory reset by carefully
inserting a paper clip end
or similar in the small hole
(marked RESET) and apply a
slight pressure.
IMPORTANT!
• The product is for indoor
use only and can be used in
temperatures ranging from
5 °C to 40 °C.
• Do not leave the product
in direct sunlight or near
any heat source, as it may
overheat.
• The declared radio range
between the unit and the
steering device is measured
in open air.
Dierent building materials
and placement of the units
can aect the wireless
connectivity range.

Related product manuals