The IKEA Mittled LED Kitchen Worktop Lighting Strip is a versatile lighting solution designed for indoor use, specifically for installation inside or under kitchen cabinets or other built-in furniture. This product utilizes non-changeable light-emitting diodes (LEDs) as its light source, offering energy efficiency and a long lifespan.
Function Description:
The primary function of the IKEA Mittled LED Kitchen Worktop Lighting Strip is to provide illumination for kitchen worktops and other areas where additional light is needed. It is designed to be mounted on surfaces, offering targeted lighting for tasks and ambiance. The modular design allows for multiple units to be connected to a single LED driver, providing flexibility in creating a customized lighting setup.
Important Technical Specifications:
- Light Source: Non-changeable light diodes (LED). This means the LEDs cannot be replaced by the user; the entire strip must be replaced if the light source fails.
- Power Supply: Requires a low-voltage Class 2 power supply (LED driver), which is sold separately.
- Connection: Designed to be connected to IKEA LED drivers.
- Maximum Wattage: The total wattage of all lamps connected to one LED driver must not exceed the maximum power stated on that LED driver, and never more than 30W.
- Maximum Units: A maximum of 10 units (lamps) can be connected to a single setup.
- Installation: Intended for surface mounting, not for recessed installation in ceilings or soffits.
- Safety Standards: Complies with safety instructions for indoor use and proper cord management to reduce risks of fire, electric shock, or injury.
Usage Features:
- Modular Design: Multiple lighting strips can be linked together to create longer runs of light, suitable for various cabinet lengths.
- Easy Installation: The product comes with mounting clips and screws for straightforward installation under or inside cabinets. Instructions detail steps for securing the clips and then "clicking" the light strip into place.
- Flexible Placement: Can be installed in a variety of configurations to suit different kitchen layouts and lighting needs.
- Compatibility: Designed to work seamlessly with IKEA LED drivers and power supply cords (sold separately), ensuring proper functionality and safety.
- Task Lighting: Provides focused illumination ideal for food preparation, cooking, and other kitchen tasks.
- Ambient Lighting: Can also contribute to the overall ambiance of the kitchen space.
Maintenance Features:
- Cleaning: The product can be cleaned with a damp cloth. Users are advised against using strong cleaning agents to prevent damage.
- Regular Checks: It is important to regularly check the cord, transformer (LED driver), and all other parts for any signs of damage. If any part is damaged, the product should not be used.
- Cord Management: Cords should be routed and secured using insulated staples or plastic ties to prevent pinching or damage, especially when cabinets are pushed to the wall. Cords should not be concealed behind walls, ceilings, soffits, or cabinets where they cannot be visually examined periodically. Any damaged cords must be immediately replaced.
- Non-Serviceable Light Source: As the light source consists of non-changeable LEDs, there is no user-serviceable component for the light itself. Disassembling the product is not recommended as it can cause damage to the eyes from the light diodes.
- Water Resistance: The product is not designed to be immersed in water.
- Always follow the assembly instructions carefully to avoid risks of fire or electric shock.
- Ensure the low-voltage Class 2 power supply is located outside the cabinet and is not concealed.
- The line voltage power supply cord must not be concealed or run through openings in the cabinet, walls, ceilings, or floors.
- Mount the lamp only on a surface that is mechanically sound to prevent injury or damage if the lamp is pulled from the surface.
- Only use IKEA LED drivers specifically suited for this product.
- Keep these instructions for future reference.
To Next Page
Need help?
General
