EasyManua.ls Logo

IKEA RODULF - RODULF Desk Maintenance and Technical Specs; Desk Maintenance and Repair; Product Servicing and Support

IKEA RODULF
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Maintenance and repair instructions
After approximately 1 week of use,
check that the screws are properly
tightened.
If the desk cannot be lowered
or raised, check the connections
between the control box and the wall
socket.
If any part of the electrical system is
to be replaced, the electrical cable
must rst be disconnected from the
wall socket.
Replace the electrical part and then
reconnect the electrical cable to the
wall socket. The desk is now ready for
use.
If the desk still does not work, please
contact your nearest IKEA store or
customer service.
Technical data
Product servicing
Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltages
or other risks.
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
Telephone no.: +46(0)476-648500
Model name RODULF si/st desk 140x80
Type number RODULF-GF-470
Input 100–240 V AC 50/60 Hz
Standby power consumption <0.1 W
Operating temperatures 10–40 °C (50–104 °F)
Operating humidity 20–90 % RH at 40 °C (104 °F)
Sound level: <50 dB(A)
Height setting interval: 68–115 cm or 26.8–45.3 inches
Maximum load: 80 kg or 176 lb

Related product manuals