IKEA SKINANDE - Cleaning the filters; Cleaning the filter of the inlet hose

Cleaning the filters
1
Make sure that
there are no
residues of food or
soil in or around the
edge of the sump.
2
C
B
A
The filter system is
made of three parts.
3
To remove filters (B)
and (C), turn the
handle
counterclockwise
and pull it upwards.
Remove the filter (C)
out of filter (B).
Wash the filters with
water.
4
Remove the flat
filter (A). Wash the
filter with water.
5
D
Put the flat filter (A)
back in place. Make
sure that it is
correctly positioned
under the 2 guides
(D).
6
Reassemble the
filters (B) and (C).
Put them back in the
filter (A). Turn the
handle clockwise
until it locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance
Cleaning the filter of the inlet hose
1
Close the water tap.
2
A
Disconnect the hose.
Turn the fastener A
clockwise.
3
Clean the filter of
the inlet hose.
4
ENGLISH 19