8 AA-2289663-1
4. Do not connect the chain to the supply while it is in
the packing.
5. For series-connected lamps where fused lamps are
used, do not replace a fused lamp with a non-fused
lamp.
6. Ensure all lampholders are tted with a lamp.
7. Ordinary lighting chains marked for indoor use shall
not be used outdoors.
8. Lighting chains which rely on gaskets to provide
protection against ingress of dust and moisture must
not be used without all gaskets being in place.
9. Make sure to follow the markings regarding series and
parallel connection of lighting strings.
10. Only replace 'fused' lamps (sometimes identied by a
white mark on the glass) with identical 'fused' lamps.
11. For non-standard lamps (e.g. lamps of push-in
type) replacement lamps must be of the same types
as those delivered originally or a type specied by the
manufacturer.
12. Do not attempt to replace non-replaceable lamps.
To Next Page
Loading...
Need help?
General
