7
Installation on Christmas Tree
Christmas trees because of the pine oils, and particularly
after being in a heated room for a week or two, are very
ammable. Tree decorations may also be ammable
and should be kept clear of the lamps as far as possible.
Christmas trees should be mounted securely so that they
are unlikely to fall over, or be knocked over by children or
pets. They must be kept clear of heat sources, including
spot lamps and particularly CANDLES.
Take care when decorating the tree, use a stepladder if
the tree is tall and wear shoes. Many more accidents are
caused by treading on plugs and lamps in bare feet than
faulty electrical equipment.
English
Guidance for Seasonal and Holiday lighting sets.
Follow these and any other instruction provided by
the manufacturer, it is for your safety.
1. Install the lighting chains so that there is easy access
to the socket-outlet so that the lights can be turned
o when you go out or go to bed. Never leave lighting
chains on when you go out or go to bed.
2. Do not remove or insert lamps while the lighting chain
is connected to the supply.
3. For series-connected lamps other than those in sealed
lighting chains, replace failed lamps immediately by
lamps of the same rated voltage and wattage to prevent
overheating; this requirement does not apply to sealed
lighting chains.
To Next Page
Loading...
Need help?
General
