EasyManua.ls Logo

IKEA Sonos - Wireless Module Advice and Instructions; Module Specifications and Conditions; Installation Guidance; Usage Restrictions

IKEA Sonos
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2(5)
Tulpanvägen 1
Box 702
343 81 Älmhult, Sweden
Telephone: +46(0)47681000
Org.nr: 556074-7551
Advice and instructions for Wireless Module
Sound level:
Lower than 55 dB(A).
Temperature interval at usage:
+10 °C up to + 40 °C/+50 up to +104 °F.
Temperature interval at storage:
18°C up to 70°C/0 up to 158°F.
Humidity:
20% up to 90% at 4C/104°F.
Power supply unit:
The module is power by a specified DC supply
that is mains connected. The power
supply is
certified for its intended usage and evaluated for
Model:
92
00632
This appli
ance shall only be used
together with the matching DC power supply.
Installation instructions
Install module in host product
screws and
hand tighten. Install all connectors from the
host product to the wireless module.
Place the electrical
so that they do not get damaged, see
assembly instruction.
Connect the electrical cable to a
socket.
Usage of the Wireless Module
The wireless module can only be used within the scope of approval within the country from
where the
authorization was granted. IKEA strongly discourages
the use of the wireless module
outside the bounds
of the
equipment authorization. This device can only be used with IKEA
approved antenna with characteristics and gain that is compatible with the
equipment
authorization
Sound level:
Lower than 55 dB(A).
Temperature interval at usage:
+10 °C up to + 40 °C/+50 up to +104 °F.
Temperature interval at storage:
-18°C up to 70°C/0 up to 158°F.
Humidity:
20% up to 90% at 40°C/104°F.
Power supply unit:
The module is power by a specified DC supply that is mains connected. The power
supply is certified for its intended usage and evaluated for safety.
Model:
920-00632
30 March 2021
Advice and instructions for Wireless Module:
This appliance shall only be used together with the matching DC power supply.
Installation instructions:
-
Install module in host product with screws and hand tighten. Install all connectors from the
host product to the wireless module.
-
Place the electrical cables so that they do not get damaged, see assembly instruction.
-
Connect the electrical cable to a wall socket.
Usage of the Wireless Module:
The wireless module can only be used within the scope of approval within the country from
where the authorization was granted. IKEA strongly discourages the use of the wireless module
outside the bounds of the equipment authorization. This device can only be used with IKEA
approved antenna with characteristics and gain that is compatible with the equipment
authorization.