EasyManuals Logo

IKEA STARKVIND Assembly Instructions

IKEA STARKVIND
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
or in a room with great variations in
temperature.
• This product is not a substitute for
proper ventilation, regular vacuum
cleaning or the functionality of an
extractor hood or fan while cooking.
• Always place and use the product on a
dry, stable, even and horizontal oor.
• Leave at least 30 cm of free space
around the product.
• Do not use the product in areas where
ammable gases or combustible
materials are used or stored.
• Do not exert excessive force or subject
the product to bumps and bangs.
• Install the product so that no obstacles
around the product block the
circulation of air.
Operational safety
• Never place the product in water.
• Do not disassemble, repair or modify
the product.
• Unplug the product before you clean
it.
If the air purier produces a strange
noise, burning smell or smoke,
immediately remove the power plug
from the electrical outlet and call our
Customer support.
Do not spray any ammable materials
into the air inlet.
Do not stick ngers or foreign objects
into the air inlet or outlet.
Replace lters with new ones
according to lter replacement cycles.
Product performance may otherwise
deteriorate.
• Do not push or lean against this
product since it may tip over and cause
physical injury or product malfunction.
• The product does not remove carbon
monoxide (CO) or radon (Rn). It
cannot be used as a safety device
upon accidents involving combustion
processes and hazardous chemicals.
IMPORTANT:
STARKVIND air purier can be used as
a standalone device and also works
together with TRÅDFRI Gateway and the
IKEA Home smart app.
QUICK GUIDE
If you have an IOS device:
Go to the App Store and download the
IKEA Home smart app. The app will
take you through the process of adding
STARKVIND air purier to your TRÅDFRI
Gateway.
If you have an Android device:
Go to Google Play and download the
IKEA Home smart app. The app will
take you through the process of adding
STARKVIND air purier to your TRÅDFRI
Gateway.
Pairing: Adding STARKVIND air
purier to your TRÅDFRI Gateway.
STARKVIND air purier table:
You will nd the pairing button by
removing the tabletop.
• The range between the gateway and
the receiver are measured in open air.
Dierent building materials and
placement of the units can aect the
wireless connectivity range.
• If the app can't connect your air
purier to the gateway, then try to
move the air purier closer to your
gateway.
Fan speed control
The fan speed can be regulated
between 1 to 5 and Auto mode.

Other manuals for IKEA STARKVIND

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKEA STARKVIND and is the answer not in the manual?

IKEA STARKVIND Specifications

General IconGeneral
TypeAir Purifier
Air Quality SensorYes
Fan Speeds5
Particle FiltrationYes
Pollen FiltrationYes
Smoke FiltrationYes
Gas FiltrationYes
Pre-filterYes
HEPA filterYes
Carbon filterYes
Filter TypeCarbon filter
Room Size20 m²
ConnectivityWi-Fi, IKEA Home smart app
Noise Level24 - 53 dB
Power Consumption3-33 W

Related product manuals