IKEA STARKVIND - Page 7

7
5. Insert the new lter(s). (Touch only
the frame of the gas lter).
6. Reconnect the power supply cord.
7. When you have replaced a lter,
press and hold the RESET button for 3
seconds. The reset initialises the lter
replacement cycle counter.
8. Fix the pre-lter in place.
• Wash your hands thoroughly after
replacing the lter(s).
3 sec.
Technical specications
Model: STARKVIND air purier
Type: E2006
Dimensions: Diameter: 54cm H: 55cm
Weight: approx. 7.9 kg
Input: 24.0V
, 1.3A, 31.0W
Range: 10 m in open air
Operating frequency: 2400~2483.5MHz
Output power: 8 dBm
Filters:
Filter for particle removal.
Optional: Filter for gas cleaning.
Power Supply Unit
Type: KA4802A-2402000P
Input: 100-240 VAC, 50/60 Hz, 1.2A
Output: 24.0V , Max 2.0A,
Max 48.0W
Indoor use only.
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
STARKVIND air purier E2006:
Operational modes with Particle lter (with Gas lter)
Level Noise CADR Power
1 24dB(A) (24dB(A)) 50m³/h (45m³/h) 2.0W (1.9W)
2 31dB(A) (31dB(A)) 110m³/h (95m³/h) 5.0W (4.0W)
3 42dB(A) (41dB(A)) 180m³/h (145m³/h) 11.5W (9.5W)
4 50dB(A) (48dB(A)) 240 m³/h (205m³/h) 24.5W (19.0W)
5 53dB(A) (51dB(A)) 260 m³/h (240m³/h) 33.0W (25.0W)
The recommended lter replacement cycles may dier depending on the operating
environment.
Filter Cycle Action
Pre-lter Every 2~4 weeks Cleaning
Air quality sensor Every 6 months Cleaning
Particle lter Every 6 months Replacement
Gas lter Every 6 months Replacement