5
FACTORY RESET
Lighting products:
Toggle the main power switch 6 times.
Motion sensor:
Press the pairing button 4 times within 5 seconds.
CHANGE BATTERY:
When unit is used regularly and as intended, the
batteries will last for approximately 2 years.
A red LED indicator will shine steadily when it’s time to
replace the batteries.
Open the battery lid and replace the batteries with
CR2032 type batteries.
IMPORTANT!
• The unit can be used in temperatures ranging from
0ºC to 40 ºC.
• Do not leave the unit in direct sunlight or near any
heat source, since this can cause overheating.
• Do not subject the unit to wet or excessively dusty
environments since this can cause damage to the
unit.
• The range between this unit and the receiver are
measured in open air.
• Dierent building materials and placement of the
units can aect the wireless connectivity range.
CARE INSTRUCTIONS
To clean the motion sensor wipe with a soft dry cloth.
NOTE!
Never use abrasive cleaners or chemical solvents since
this can damage the product.
To Next Page
Loading...
