Do you have a question about the IKEA TRADFRI E1746 and is the answer not in the manual?
Product Type | Repeater |
---|---|
Model | E1746 |
Product Name | TRADFRI signal repeater |
Wireless Protocol | Zigbee |
Compatibility | TRADFRI gateway |
Power Source | Mains |
Function | Extends the range of the TRADFRI gateway |
Add IKEA Home smart products to your system using the provided instructions.
Instructions to pair IKEA Home smart products with the TR uevoDFRI steering device.
How to reset the wireless signal repeater to its original factory settings.
The Signal Repeater is for indoor use only and operates between 0 uevoC and 40 uevoC.
Avoid direct sunlight and heat sources to prevent overheating.
Range is measured in open air; building materials can affect connectivity.
Use accessible wall sockets in dry locations. Supervise children to prevent misuse.
Damaged devices must be destroyed; never use faulty USB cables for charging.
Type E1746, 5.0V DC input, 10m range, 2405-2480MHz, 3 dBm output.
Connect the power adapter to the wall socket and insert the Signal Repeater.
Use recommended USB cables for charging and replace faulty ones promptly.
The device can charge the wireless roller blind battery-cell.
USB cable length and quality affect charging speed and battery performance.
Devices may get warm during charging; this is normal and will cool down.
Storage: -20 uevoC to 25 uevoC. Operating: 0 uevoC to 40 uevoC.
Unplug the power adapter before cleaning and when not in use.
Clean the Signal Repeater and Power Adapter with a soft dry cloth.
Never use abrasive cleaners or chemical solvents to prevent product damage.
Do not attempt repairs yourself due to risk of dangerous voltage exposure.
PSU Type ICPSW5-5EU-1/5GB-1, Input 100-240 VAC, Output 5.0V DC.
Max load 1.0A, 5.0W; details average and low load efficiency.
IKEA of Sweden AB, Address Box 702, SE-343 81 uevolmhult, SWEDEN.
Dispose of the product separately from household waste for recycling.