IKEA TRETAKT - Pairing a steering device to your smart plug; Getting started with DIRIGERA hub; IKEA Home smart app; Good to know

4
English
The DIRIGERA hub can be used to control
the TRETAKT smart plug via the IKEA
Home smart app.
IKEA Home smart app
For Apple devices, download
the app using the App
Store. For Android devices,
download the app using
Google Play store.
Note: If you have a TRÅDFRI gateway
please use IKEA Home smart 1 app.
Getting started with DIRIGERA hub
Download the IKEA Home smart app and
follow the instructions on screen to add
the dimmer/switch to your IKEA Home
smart system.
Pairingasteeringdevicetoyoursmart
plug
When the smart plug is sold together with
a remote (in the same package), they are
already paired. To add more smart plugs,
just repeat the steps below:
1. Make sure that your smart plug is
plugged in, and the main power is
turned on.
2. Hold the steering device close to the
smart plug you want to add (no more
than 5 cm away).
3. Press and hold the Pairing button
for at least 10 seconds. A red LED will
steadily shine on the steering device.
On your smart plug a white light will
begin to dim and ash one time to
indicate that it has been successfully
paired.
Up to 10 smart plugs can be paired with
1 steering device. Make sure to pair them
one at a time. If the smart plugs are close
to each other, disconnect those that have
already been paired from the wall outlet.
Turnon/oyourdevice
Press the On/O button on the smart
plug once to turn it on. Press it once again
to turn it o.
When using a remote: Press the On
button ( | ) to turn the smart plug on.
Press the O button (o) to turn the smart
plug o.