IKEA VIKHAMMER - User Manual

VIKHAMMER

Summary

Getting Started and Safety Information

Parts and Hardware Identification

Assembly Steps

Step 1: Prepare Base Panel

Attaching screws to the base panel of the nightstand using a screwdriver.

Step 2: Attach Drawer Slides

Mounting drawer slides to the side panels of the nightstand structure.

Step 3: Assemble Main Body Frame

Inserting dowels and attaching side panels to form the main cabinet structure.

Step 4: Insert Cam Locks

Inserting cam lock nuts into pre-drilled holes for panel connection.

Step 5: Attach Top Panel

Securing the top panel onto the assembled cabinet structure.

Step 6: Prepare Vertical Supports

Inserting dowels into the vertical support pieces for the upper section.

Step 7: Attach Top Surface

Connecting the top surface to the vertical supports.

Step 8: Secure Vertical Supports

Fastening vertical supports to the main body using screws and a hex key.

Step 9: Attach Additional Supports

Securing the remaining vertical supports for the upper frame.

Step 10: Install End Caps

Placing decorative caps onto the exposed ends of the frame structure.

Step 11: Attach Internal Shelf

Inserting shelf support pins and placing the internal shelf.

Step 12: Assemble Drawer Sides

Connecting side panels to the drawer base.

Step 13: Insert Drawer Cam Locks

Inserting cam lock nuts into the drawer side panels.

Step 14: Attach Drawer Back Panel

Securing the back panel to the drawer assembly.

Step 15: Attach Drawer Front

Fastening the drawer front to the drawer box using screws.

Step 16: Attach Drawer Runners

Mounting the drawer runner clips onto the drawer sides.

Step 17: Insert Drawer

Sliding the assembled drawer into the nightstand frame and adjusting.

IKEA VIKHAMMER Specifications

General

Brand	IKEA
Model	VIKHAMMER
Category	Indoor Furnishing
Language	English