The VIKLA is a baby changing unit designed for safe and convenient diaper changes. It is intended for use with children weighing up to 9 kg. This product is manufactured by 509 Crew DE GmbH, located at Pfarrackerstr. 36, D-90522 Oberasbach, Germany, and is made in China.
Function Description:
The VIKLA serves as a dedicated surface for changing a baby's diapers. It provides a raised and contained area to facilitate the changing process, aiming to enhance safety and comfort for both the child and the caregiver. The design includes side rails to help prevent the child from rolling off the changing surface.
Important Technical Specifications:
- Maximum Child Weight: The product is suitable for children weighing up to 9 kg. Exceeding this weight limit may compromise the safety and stability of the changing unit.
- Dimensions: The changing surface measures approximately 47.5 cm in width and 50.5 cm in length. These dimensions are crucial for ensuring compatibility with additional changing mats and for fitting the unit in the intended space.
- Components: The assembly requires various parts, including screws (A x9, B x2, C x4, D x2, E x2), fasteners (F x2, G x4), and an Allen key (H x1). These components are designed to create a sturdy and stable structure when correctly assembled.
Usage Features:
- Safety First: It is paramount never to leave a child unattended on the changing unit. Constant supervision is required to prevent accidents.
- Heat Source Awareness: Users must be mindful of the risk posed by open fires and other intense heat sources (e.g., electric radiators, gas-fired ovens) in the immediate vicinity of the changing unit. These sources can cause burns or other hazards.
- Additional Changing Mat: The use of an additional changing mat is recommended to enhance comfort and hygiene.
- Assembly and Stability: All assembly fittings must be correctly tightened and checked regularly to ensure the unit's stability. Before and during each use, the stability of the changing unit should be verified.
- No Movement with Child: The product should never be moved or lifted when a child is on it.
- Hazard Prevention: Caregivers must prevent the child from accessing any potential safety hazards within reach of the changing unit.
- Supervised Play: Other children should not be allowed to play unattended near the product.
- Child Safety During Assembly: To avoid injuries, children should be kept far away from the product during the assembly process.
- Part Integrity: The changing unit should not be used if any part is defective, broken, or missing. All additional or replacement parts must be obtained exclusively from the manufacturer or supplier to ensure compatibility and safety.
Maintenance Features:
- Regular Cleaning and Inspection: The product should be cleaned, maintained, and checked regularly to ensure its continued safe operation.
- Cleaning Agents: Only mild cleaning agents should be used. Aggressive cleaning agents are strictly prohibited as they may damage the material or finish of the changing unit.
- Cleaning Method: The product should be cleaned with a damp cloth. This method is gentle and effective for routine cleaning.
- Fastener Check: Regular checks of all assembly fittings are necessary to ensure they remain adequately tightened. Loose fittings can compromise the stability and safety of the unit.
Need help?
General
To Next Page
