ENGLISH 11
Technical data
The technical information is situated in
the rating plate on the internal side of the
appliance.
Electrical connection for Australia
Power Cord and Plug: Declared Article –
Mandatory Approval Applies:
Current Australian Approval Certicates will
need to be forwarded, showing compliance
with applicable Australian Standards, as
noted below. Plug to have insulated pins.
Plug and Cord to have approval marking,
as required by the relevant Approval
Certicate
· AS/NZS 3112: 2004 with Amendment 1, for
Plug
· AS 3191: 2008, for Cord, or;
· ‘HAR’ Certication, for Cord
To Next Page
Loading...
