Ikegami HL-45A - Quest for Further Improvement in Operability; Triax Operation

Quest for Further Improvement in Operability
With
Triax Adaptor
(TA-45)
■
Triax Operation
Triax operation can be achieved by
connecting the existing TA/BS/OCP-40.
Remote control and high-res video
transmission can be implemented.
And also, a newly developed triax system
(TA/BS/OCP-45) is now available.
Moreover, because a 5-inch or 6-inch VF
can be mounted, the HL-45A/45AW can
be configured as a studio camera.
With Betacam SP VCR (BVV-5)
With DVCAM VCR (DSR-1)
With DIGITAL S VCR (BR-D40)
With S-VHS VCR (BR-S422)
With DVCPRO50 VCR(IR-D90/AJ-D90)
■
TA-45
• Equipped with a pivoting type TRIAX
connector.
• INCOM facilities.
• Q-TV output available as an option.
■
BS-45
• Compact Size(4U half-rack size) and
lightweight(13.2 lbs)
• SDI(D1) output and Q-TV(max. 300m with
8.8mm diameter TRIAX cable) available as
options.
• DC operation available as an option.
■
Control Panel
• Three types of control panels available;
(1) OCP-45
• Joystick operational remote control for HL-
45/45W and BS-45.
• Various set-up controls available by the
remote function of the camera menu.
(2) RM-45
• Compact control panel equipped with basic
operating controls.
• Can be attached to the front of the BS-45.
(3) RCP-50
• Full control of camera functionality.
• Can be attached to the front of the BS-45.
• Equipped with memory card function.
■
Rear Panel Adaptor/VCR Dockable
The HL-45A/45AW can be docked with various VCRs, with the aid of very compact
VCR rear panel adaptors.
■
Supports Various Video Output Signals
The HL-45A/45AW can output composite video, Y/C, component, and RGB signals.
Main Features of New Triax System