To Next PageTo Next Page
Need help?Do you have a question about the Ikegami OCP-399 and is the answer not in the manual?
General| Brand | Ikegami |
|---|---|
| Model | OCP-399 |
| Category | Control Panel |
| Language | English |
Explains warning symbols used in the manual for hazards.
Instructions for safe use and handling of the OCP to prevent damage or injury.
Advice on periodic maintenance for product longevity and safe operation.
Outlines the five chapters and the order of operating procedures.
Explains symbols used in the manual and lists related reference manuals.
Diagrams showing the location of switches and connectors, with numbered identification.
Details on power, color match, panel enable, PM/PAGE, and auto setup switches, plus head power indicator.
Explains various mode switches including CAP, BARS, CAL, SHUTTER, COLOR CORR, MATRIX, SUPER KNEE, CUSTOM COLOR, BLK STRETCH, GAMMA, and GAIN.
Details FILTER, SCENE FILE switches, and DTL/SKIN, C.SAT/GAMMA, KNEE controls and related switches.
Describes PED FLARE switch, IRIS indicator, AUTO IRIS switch, JOYSTICK controls, and CALL switch.
Details ALARM, CABLE OPEN/SHORT indicators, IRIS controls, MONITOR SELECT, KNOB FREE, LENS EXT, TALLY, PS CONT, COLOR MATCH, COMMAND, and PREVIEW connectors.
Illustrates how to connect the OCP to the camera head and Base Station (BS).
Explains the procedure for connecting the OCP to the camera head in self-contained operation.
Details connecting the OCP to the BS using CP and POWER CONT cables.
Describes ON/OFF power control from OCP and data transfer for color matching in multi-camera systems.
Provides pin assignments for PS CONT and COLOR MATCH connectors.
Details the pin functions for the COMMAND connector used for control signals.
Instructions for powering on the OCP for both Non-EU and EU BS models.
Procedure to check video output by displaying color bars signal.
How to check video system levels using test pulses and external charts.
Details the auto setup functions available for various control items like LEVEL, GAIN, and WHITE BALANCE.
Step-by-step guide to perform a quick auto setup using the OCP.
Detailed steps for performing a standard auto setup using an auto setup chart.
Instructions for adjusting white balance using the AWB switch on the OCP.
Steps for executing auto black balance and auto black shading using the ABB switch.
How to set preset and variable shutter speeds using the OCP switches.
Guides on improving low luminance reproducibility and suppressing glare using DTL controls.
Explains adjusting skin color DTL levels and automatic hue detection.
Procedure for correcting color temperature across multiple cameras using the COLOR MATCH function.
Details on how to create and register scene files for ON/OFF and level controls.
Instructions on how to modify and overwrite existing scene files.
How to remotely control camera or BS menus using the OCP's PM IND/PAGE and UP/DOWN switches.
Guide on how to open the OCP cover and access the DIP switches for settings.
Explains the functions activated by setting DIP switches to ON, such as GAIN SENS, IRIS MODE, and TALLY GUARD.
How to interpret alarm lamp flashes and use self-diagnosis for fault detection.
Explains how to interpret the diagnostic display and check item descriptions for troubleshooting.
Provides power supply ratings, dimensions, and weight of the OCP.
Lists analog/ON-OFF controls, operating/storage conditions, and earthquake resistance.
Detailed diagram showing the external dimensions and physical layout of the OCP.
