Need help?Do you have a question about the Ikegami OCP-300 and is the answer not in the manual?
General| Supported Cameras | Ikegami HD and 4K cameras |
|---|---|
| Type | Control Panel |
| Control Interface | Ethernet |
| Interface | Ethernet |
| Connectors | RJ45 |
| Functions | Camera control, diagnostics |
| Display | LCD touch screen |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Details precautions for handling the product, power, and specific conditions to avoid.
Explains AUTO IRIS, IRIS/MPED ENABLE, and various switches and knobs for iris control.
Details the JOYSTICK controls for IRIS and M-PED, including AUTO IRIS and IRIS/MPED ENABLE.
Details how OCP-300 combines absolute and relative control for potentiometer and rotary encoder.
Describes the knob free function for preventing control knob invalidity and expanding operation range.
Explains the procedure for performing all manual settings and clearings across the system.
Explains how to upgrade firmware for OCP-300, connected camera, and BS/CCU using a memory card.
Shows how to display firmware program numbers and FPGA versions for OCP-300 and connected devices.
Details how to set the ARC network ID for command connection between BS/CCU and control panel.
Explains how to configure IP address, subnet mask, and default gateway for Ethernet connection.
Details the steps to change the operation range using password protection.
Provides instructions for changing the operation range password and recovery options.
Details the step-by-step procedure for executing Clear to Standard and Recall Preset File functions.
Details how to switch ON/OFF character display and edit BARS TITLE characters.
Guides users on how to assign functions to USER menu switches and pages.
Details how to assign ON/OFF switches and analog items to the Operation screen pages.
Explains how to save/load panel data to/from a memory card using various methods.
Details saving/loading User File, Factory File, and performing RAM Clear on the control panel.
Provides the procedure to adjust IRIS OPEN/CLOSE end positions using the LCD screen.
Enables individual or simultaneous control of Lch/Rch cameras for 3D applications.
Allows selection of single or multiple cameras for operation, requiring specific KEY files.
Resumes all panel configuration items (SETTING, CUSTOMIZE, Control Depth, STD FUNCTION) to initial settings.
Explains how to interpret and diagnose issues when the OCP ALARM indicator blinks.
Provides instructions for resetting the OCP control panel by pressing the STANDARD switch.
Addresses issues during firmware updates, such as power failure or erroneous updating.
Provides a step-by-step guide for updating the OCP-300 firmware using an SD memory card.
Explains how to update the firmware of connected devices (camera, BS/CCU) from the OCP-300.
To Next Page
