[Example 2J Changing CONTRAST PRESET , B. BACKGROUND, and D. GAIN Registered in the FILE 2 Memory
Order
Operation
1
2
3
4
5
6
- 30 -
Explanation
Press the IFILE 21 switch, and the
PRESET
data stored in FILE 2 will be
output.
Press the !CHANGE PRESET! switch
and all preset switches will blink.
However, the
IAPTj preset switch does
not blink unless the front panel
IAPT j
switch is "ON".
Press the
!CONTI preset switch and
change the contrast preset data with
the rotary encoder.
Press the
IB. BACKGROUND! switch
and change the B.background with the
rotary encoder.
Press the IB. GAINI switch and change
the B.gain with the rotary encoder.
When you have finished changin the
data, press the CHANGE PRESET
switch. The new data is stored into
memory when the LED goes out. If you
press thelCLEARlswitch anytime before
you
press the !CHANGE PRESET!
switch, this throws out the new data
and returns the system to the data you
had before you started the changes.
. . .
.,-·1
j
--~1
. ~;
.... J
i:
._···]
': .. !
. .-1
..J
' .J
· .. ·-
J
:'-_kl
,,
L.
To Next Page
Loading...
