Need help?Do you have a question about the Ikegami TM20-20RH and is the answer not in the manual?
General| Screen Size | 20 inches |
|---|---|
| Resolution | 800 x 600 |
| Panel Type | CRT |
| Aspect Ratio | 4:3 |
| Input Connectors | BNC |
Describes the CRT technology used, including dot mask pitch and doming reduction.
Details the use of an 8-bit MPU and 10-bit D/A converter for precise control.
Explains how the optional auto setup probe calibrates the monitor to factory settings.
Allows storing three additional color temperatures for quick selection based on usage.
Covers standard parallel, optional infrared, and serial remote control options.
Utilizes CRT cathode current detection for stable white balance over time.
Improves picture quality by reducing cross luminance and cross color.
Details the various composite, RGB, Y/C, and digital input options available.
Describes the various built-in test signals for calibration and verification.
Features plug-in video system boards for easier repair and checks.
Provides general specifications including power, ambient temperature, humidity, dimensions, and weight.
Details the available input signal types, connectors, and impedance.
Specifies input levels for composite, sync, RGB, YPBPR, Y/C, and digital signals.
Lists CRT dot pitch, horizontal resolution, preset contrast, and maximum brightness.
Specifies the output level for decoder options.
Covers frequency response, pulse response, and linearity characteristics.
Details frequency response, demodulation phase difference, and subcarrier synchronization.
Specifies picture size, raster size stability, deflection distortion, and convergence.
Lists various functions like comb filter, auto setup, test signals, and menu assist.
Describes memory types (ROM, RAM) and battery backup specifications.
Shows dimensional drawings and external views of the monitor models.
Guides on connecting various input signals and remote connectors.
Explains the pin connections for the parallel remote connector.
Instructions for powering the monitor on and off, and details on fuses.
Explains the functions of the power, degauss, warning LEDs, and remote sensor.
Details all controls on the front panel and pull-out panel.
Step-by-step guide for white balance, color balance, focus, rotation, brightness, and contrast.
Procedures for changing preset data and storing configurations in memory files.
Guide to navigating and using the monitor's menu system for various settings.
Explains various on-screen messages and their meanings.
Describes digital kits (D1, D2) for monitoring digital signals.
Lists decoder boards for NTSC, PAL, and SECAM formats.
Details the Faroudja comb decoder for improved picture quality.
Adds Y/C input/output and serial remote functions.
Probe for automatic adjustment of factory setting color temperature.
Wireless remote control for monitor functions.
Enables 2-channel AUX input.
Allows mounting the monitor in a standard 19-inch rack unit.
Termination plug for loop-through connections.
Manual for maintenance, adjustments, schematics, and parts list.
Controller for centrally managing multiple monitors via a coaxial cable.
Instructions for removing the top, side, and rear covers.
Shows internal layout diagrams for TM14-20RH/RP and TM20-20/30RH/RP models.
To Next Page
