21
Operation
Open the lid and fill the stainless steel tank with water.
Place the item into the water.
The item should be completely covered by water, but the water level
must not exceed the ”MAX”-mark.
Plug the cleaner into socket outlet.
Press the ”ON”-button to start a 180 second work cycle and the red
indicator light will turn on. When the time is reached, the light will
turn off and the cleaner stops working.
If you want to stop the machine during cleaning, press the ”OFF”-
button.
Press the ”RESET”-button to restart a new 180 second work cycle.
When the cleaning is completed, unplug the machine, open the lid
and remove the cleaned item. Then pour out dirty water from the
stainless steel tank and wipe up the machine and all its parts.
Runnin
the machine without water ma
dama
e the cleaner!
During cleaning a ”buzzing” sound will be heard. This means that
the machine is workin
ro
erl
.
To Next Page
Loading...