20
Attention: When the item is smeary or extraordinary dirty, add about 5-
10ml of detergent into the water to enhance the cleaning result.
Principle
OPERATION
Four ways of cleaning
GENERAL CLEANING
Use only tap water for general cleaning. The water should completely cover
the item to be cleaned, but the water level must not exceed the “MAX”-mark
or be below the ”MIN”-mark.
ENHANCED CLEANING
CLEANING BY PARTS
For large items, clean them in parts as shown in the picture.
EXTENSIVE CLEANING
When the item needs extensive cleaning or disinfecting, use ”ENHANCED
CLEANING” first. Then replace the water, add about 5-10ml of ordinary de-
tergent and restart cleaning for about 3 minutes.
During the low pressure
stage, millions of microscopic
bubbles form and grow. This
process is called
”CAVITATION”.
During the high pressure
stage, the bubbles implode
releasing enormous amounts
of energy. The bubbles work in
all directions, attacking the
surface and invading all re-
cesses and openings.
As ultrasonic waves through
the solution in the tank, it
causes alternating high and
low pressures in the solu-
tion.
To Next Page
Loading...