EN
14
SETTING
Setting the time
Setting the speed
1. Time range: 0-90
2. Press button: Turn in clockwise to increase time and in anti-clockwise to reduce the time. The time is
shown on display like below.
1. Temperature range: 37-120ºC
2. Press button. Turn in clockwise to increase temperature and in anti-clockwise to reduce the time. The
temperature is shown on display like below.
Setting the temperature
1. Speed range: 0-10
2. Press button, Turn in clockwise to increase speed and in anti-clockwise to reduce the speed. The
speed is shown on display like below. During heating: only speed 1~3 is available.
3. DIY Mode:
• Speed 1-3: ash and remain alight after unit starts working.
• Speed 4: ash and remain alight after unit starts working.
• Speed 5 and above: Only ash and remain alight.