IKONIX SCI 290 Series User Manual

hipot.com 17
PROGRAM A MEMORY: CHANGE CONTINUITY
START
When CONT is selected. Press the
rotary knob to edit the Continuity.
The options will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit CONT.
Turn the rotary knob to change
the Continuity setting:
ON or OFF.
Press the rotary knob to select the
setting.
When done, you will be promted
to enter a value for HI-Limit.
Then enter a value for LO-Limit.
Then enter a value for Oset.
Then enter an oset value
manually.
Then press the test button.
Short the Cont. Check lead with
the Black Return Lead as shown above
RETURN
POWER
RESET
TEST
H.V.
5KVAC MAX.
6KVAC MAX.
CAUTION
HIGH VOLTAGE
CONT.
CHECK
AC/DC/IR HIPOT TESTER
MANUAL
AUTO
Press the rotary knob to conrm.
RETURN
POWER
RESET
TEST
H.V.
5KVAC MAX.
6KVAC MAX.
CAUTION
HIGH VOLTAGE
CONT.
CHECK
AC/DC/IR HIPOT TESTER
When done, select BACK to return
to the previous menu.
You will be returned to the
previous menu.

IKONIX SCI 290 Series Specifications

General

Brand	IKONIX
Model	SCI 290 Series
Category	Test Equipment
Language	English