IKONIX SCI 290 Series User Manual

hipot.com 26
START
PROGRAM A MEMORY: CHANGE DELAY - IR
When DLAY is selected. Press the
rotary knob to edit the Delay Time.
The rst digit of Delay Time will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit DLAY.
Turn the rotary knob to change
the Delay Time for each digit.
Press the rotary knob to select the
setting and move to the next digit.
When done, you will be returned
to the previous menu.
START
PROGRAM A MEMORY: CHANGE CONNECT
When CONN is selected. Press the
rotary knob to edit the Connect
Setting. The options will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit CONN.
Turn the rotary knob to change
the Connect setting: ON or OFF.
Press the rotary knob to select
the setting.
You will be returned to the
previous menu.

IKONIX SCI 290 Series Specifications

General

Brand	IKONIX
Model	SCI 290 Series
Category	Test Equipment
Language	English