EasyManua.ls Logo

Ikra Mogatec FLEXO Trim FES 1000 C User Manual

Ikra Mogatec FLEXO Trim FES 1000 C
72 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Elektro-Freischneider
Electric Brushcutter
Débroussailleuse électrique
Decespugliatore elettrico
Электрическая коса
Електричний тример
Žoliapjovė
Åлектрическа коса
73710687-04
FES 1000 C
Prima della messa in funzione leggere le istruzioni per l‘utilizzo!
Istruzioni per l’uso - Traduzione delle istruzioni per l’uso originali
IT
Vor Inbetriebnahme Gebrauchsanweisung lesen!
DE
Gebrauchsanweisung - Originalbetriebsanleitung
Read operating instructions before use!
GB
Operating Instructions - Translation of the original Operating Instructions
Lire attentivement le mode d‘emploi avant chaquemise en service!
FR
Manuel d’utilisation - Traduction du mode d’emploi d’origine
Перед применением прочитать инструкцию по эксплуатации!
RU
Инструкция по эксплуатации - Перевод оригинальной Инструкции по эксплуатации
UA
Перед використанням прочитайте інструкцію з експлуатації!
Інструкція з експлуатації - Переклад з оригінального посібника з експлуатації.
LT
Perskaitykite naudojimo instrukciją prieš naudodami prietaisą!
Naudojimo instrukcija - originalios naudojimo instrukcijos vertimas
Прочетете инструкцията преди започване на работа!
BG
Инструкция за експлоатация – превод от оригиналната инструкция
Question and Answer IconNeed help?

Do you have a question about the Ikra Mogatec FLEXO Trim FES 1000 C and is the answer not in the manual?

Ikra Mogatec FLEXO Trim FES 1000 C Specifications

General IconGeneral
BrandIkra
ModelMogatec FLEXO Trim FES 1000 C
CategoryBrush Cutter
LanguageEnglish

Summary

Safety Signs and International Symbols

Read the Operating Instructions

Instruction to read manual for safety.

Wear Head, Eye and Ear Protectors

Mandatory use of protective gear for head, eyes, ears.

Keep Other Persons on a Distance

Warning to maintain safe distance from working area.

Wear Foot Protection and Gloves

Requirement for safety boots and gloves.

Warning Symbol

General symbol for danger, warnings, or carefulness.

Danger of Injury!

Specific warning about hurled-away objects.

Maximum Speed

Indicates maximum allowed speed of cutting unit.

Caution! Run-on after power off!

Warning about rotating parts after power off.

Do Not Use Under Wet Weather Conditions

Prohibition of use in wet conditions.

Unplug Damaged Cord Immediately

Instruction to unplug damaged cord immediately.

Attention: Environmental Protection!

Guidance on proper disposal of the device.

General Safety Instructions

Application

Specifies the intended use of the brushcutter.

General Safety Instructions

Working Area

Guidelines for maintaining a clean and safe work environment.

Electrical Safety

Precautions related to the power supply and electrical connections.

Personal Safety

Advice on operator protection, focus, and clothing.

Careful Handling and Use of Power Tools

Instructions for proper operation, maintenance, and storage.

Service

Requirements for professional maintenance and repair.

Safety Instructions

General Instructions

Fundamental safety rules and precautions for using the tool.

Operational Precautions

Specific advice for operating the lawn trimmer safely.

Instructions Regarding Safe Handling

Guidelines for safe handling, cord management, and operation.

Assembly

Mounting Protective Cover for Cutting Disc

Steps for attaching the protective cover for the cutting disc.

Mounting the Cutting Disk

Procedure for attaching the metal cutting disc.

Mounting the Handle

Instructions for attaching and positioning the handle.

How to Assemble the Shaft

Steps for connecting the upper and lower shaft sections.

How to Detach the Bottom Shaft

Procedure for separating the bottom shaft from the coupling.

Installing and Putting on the Shoulder Strap

Guide to attaching and adjusting the shoulder strap.

Modifying the Brushcutter for Nylon Line Operation

Mounting the Protective Cover

Installing the large plastic cover for nylon line operation.

Dismounting the Metal Cutting Disc

Steps to remove the metal cutting disc and its accessories.

Adjusting Nylon Line

Method for extending the nylon line during operation.

Replacement of Spool

Procedure for replacing the nylon line spool.

Connection of the Tool

Switching On / Off

Working with the Brushcutter

Maintenance of the Gear

Trouble Shooting

Storing

Waste Disposal and Environmental Protection

Repair Service

Warranty

EC Declaration of Conformity

Service

Related product manuals