Ilford SPRITE 35-II User Manual (English)

To Next Page

HOW TO LOAD FILM (STEP 1)

Press the latch (A) in the direction of the arrow

and open the camera back door (B). Lift the

camera rewind crank (C) and place a new roll

of film into the chamber.

HOW TO LOAD FILM (STEP 2)

Push the rewind crank (C) back into place. Pull

out the film canister and hook the 2nd hole

onto the film take-up spool (D). Slightly advance

the film by turning the film advance wheel (E).

HOW TO LOAD FILM (STEP 3)

Ensure the film lays flat against the centre of the

camera and close the back door.

HOW TO LOAD FILM (STEP 4)

Continue to advance the film by turning the film

advance wheel (E) until it stops. Press the shutter

button. Repeat the process one more time. The

film counter (F) will now show number ‘1’, and

the camera is ready for taking pictures

SPRITE 35

II USER MANUAL

For product specifications and warranty

information visit – www.ilford.com

ILFORD and the ILFORD Logo are registered trademarks of

ILFORD Imaging Europe GmbH.

Need help?

Do you have a question about the Ilford SPRITE 35-II and is the answer not in the manual?

Ilford SPRITE 35-II Specifications

General

Camera type	Compact film camera
Viewfinder type	Optical
Film speed setting (ISO)	200 - 800
Product color	Green, Silver
Focal length range	31 mm
Aperture range (F-F)	9 - 9
Lens structure (elements/groups)	1/1
Closest focusing distance	1 m
Camera shutter speed	1/120 s
Built-in flash	Yes
Battery type	AAA
Number of batteries supported	1

Weight and Dimensions

Press latch, open door, lift rewind crank, and place new film.

Push crank back, pull film canister, hook to spool, and advance.

Ensure film is flat and close the camera back door.

Advance film until stop, press shutter twice to show '1'.