iLive IAHN40 User Manual

Wireless Headphones
User’s Guide for Model IAHN40 v2567-01
DC IN
DC IN
AUX IN
AUX IN
LED
LED
MIC
MIC
ANC ON / OFF
ANC ON / OFF
Volume/Skip
Press to adjust volume.
Press and hold to skip tracks.
Power/Play / Pause / Speakerphone
Press and hold to power ON or OFF
Press to play or pause audio.
Press to answer incoming phone call.
Active Noise Canceling
Press and hold to turn active noise canceling ON/OFF
Features
• Bluetooth 5.0
• Bluetooth Wireless: range
- 33 ft.
• Built-in microphone
• Aux in (3.5mm audio input)
• Folding adjustable
headband
• On-ear controls
• Voice prompts announce
headphone operations
• Built-in rechargeable
lithium ion battery: life
- approx. 8 hrs at 50%
volume + ANC on
• Micro-USB port for battery
recharge
Includes
• 3.5mm audio cable
• Micro-USB to USB charging
cable
DC Power Input
Microphone
Indicator LED
Aux In
Battery Charging
Initial charge time is approximately 3 hours. Charge fully before
use. The low battery indicator will ash, a voice prompt will
announce “low battery,” then the unit will automatically power
OFF.
1. Using a Micro-USB to USB cable (included), connect to
the USB port of a powered on computer or USB power
adaptor (not included) to charge the unit.
DC IN
DC IN
AUX IN
AUX IN
LED
LED
MIC
MIC
ANC ON / OFF
ANC ON / OFF
STATUS INDICATOR
Power On Flashing blue light
Charging Solid red light
Charging Complete Light OFF
Pairing Flashing red / blue light
Pairing Complete Flashing blue light

iLive IAHN40 Specifications

General

Brand	iLive
Model	IAHN40
Category	Wireless Headphones
Type	Over-Ear
Bluetooth	Yes
Charging Time	2-3 hours
Driver Size	40mm
Frequency Response	20Hz - 20kHz
Impedance	32 Ohms
Microphone	Yes
Range	33 feet (10 meters)
Color	Black

Summary

Wireless Headphones Features and Controls

Headphone Features

Details on Bluetooth version, range, microphone, audio input, headband, controls, and voice prompts.

Included Accessories

Lists the included 3.5mm audio cable and Micro-USB to USB charging cable.

Control Functions

Explains how to use buttons for power, play/pause, answering calls, volume, skip tracks, and ANC.

Battery Charging and Indicators

Charging Instructions

Provides initial charge time, low battery warnings, and connection method for charging.

Indicator Status Lights

Details the LED light behavior for power on, charging, charging complete, and pairing.

Bluetooth Pairing and Audio Playback

Initial Bluetooth Pairing

Steps for powering on, selecting IAHN40 in device settings, and confirming connection.

Playing Audio

Instructions on selecting and playing audio via Bluetooth device controls.

Switching Devices

Guidance on how to connect to a different Bluetooth device.

Alternative Audio and Noise Canceling

Auxiliary Input Mode

Instructions for connecting and using the 3.5mm audio cable for playback.

Active Noise Canceling (ANC)

How to activate and deactivate ANC for enhanced audio quality.

Support and Safety Information

Previously Connected Devices

Information on how headphones remember and reconnect to paired devices.

Customer Support Contact

Provides contact details for customer service and warranty information.

Regulatory and Safety Warnings

Includes FCC compliance, warnings about moisture, battery disposal, and hearing damage.