10
FM Radio, Line In, & Memory Card Slot
Using the Audio Input
Requires a 3.5mm audio
cable (not included)
1. Connect a 3.5mm audio cable
to the 3.5mm Audio Input and
the audio output on an MP3
player or other audio device.
2. Press the Source button to
switch to Line In mode.
3. Use the native controls on
the connected MP3 player or
other audio source to play your
audio through the unit.
Playing the Radio
1. Press the Source button to
switch to FM Radio mode.
2. Adjust the Tuning dial
to tune the radio.
Radio Reception
Adjust the position of the Telescopic FM
Antenna to improve FM radio reception.
1. Follow the instructions for
Playing the Radio.
2. Press the Mem button on
the remote or the unit.
3. Press the Mem+/- buttons on the
remote to select a preset number.
Up to 20 stations may be preset.
4. Press the Mem button to save the
current station to the selected preset.
Saving a Radio Station as a Preset
1. In FM Radio mode, press the Mem+/-
buttons to cycle through saved presets.
Tuning to a Saved Preset Station
Connecting a Memory Card
Accessing Content on a Memory Card
1. Insert a SD, MMC, or MS memory
card into the Memory Card Slot.
1. Follow the instructions for
Connecting a Memory Card.
2. In DVD mode, press and hold
the DVD/SD button to enter
Disc/Card selection mode.
3. Press the Enter button to
select Card mode.
4. Use the Arrows and Enter
buttons to select and play
content from the connected SD,
MMC, or MS memory card.
To Next Page
Loading...
