Carry strap
Portable Fabric Wireless Speaker
User’s Guide for Model ISB180 v2448-01
Controls
To charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on
computer or USB power adapter (not included) and standard
power outlet. Charging time is approximately 6 hours 30min.
Battery life is approximately 20 hours at 50% volume.
When the battery is low a voice will announce “Low Battery,”
then the unit will automatically power OFF.
While the unit is charging it will display a solid red light. When
the battery is fully charged the light will turn o.
Features
• Bluetooth wireless 5.0: range 33 ft.
• Micro SD card port
• Carry strap
• Voice prompts
• Volume wheel
• Built-in rechargeable battery: approximately 20 hrs of
playtime at 50% volume
• Micro-USB port for battery recharge
Includes
• User’s Guide
• Micro-USB to USB charging cable
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit
and the audio output/headphone jack on an audio
device.
2. The speaker will automatically switch to Aux Mode and
The Pairing/Source Indicator LED will change to green.
3. Use the controls on the connected device to select and
play audio. Be sure the volume on your connected device
is audible when you begin playing.
1. Play/Pair: Press to play/ pause tracks. Press and hold to
enter pairing mode.
2. Skip: Press to skip audio tracks.
3. Power/Source: Press and hold to power ON and OFF.
Press to change source modes to Bluetooth, Aux, or
Micro SD.
4. Volume Wheel: Spin volume wheel clockwise to raise
volume level. Spin counter-clockwise to lower volume
level.
5. Pairing/Source Indicator LED.
6. Charging Indicator LED.
4
5
1
3
2
6
To Next Page
Need help?
General
