iLive ISB330 - Charging the Battery; Micro SD Card Usage; Aux In Connection; Bluetooth Wireless Pairing and Playback

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2021 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output on an audio device.
2. The Speaker will automatically switch to Aux mode.
3. Use the controls on the connected device to select and play audio. Be sure
the volume on your connected device is audible when you begin playing.
AUX IN DC IN
Micro SD
1. Load a Micro SD drive into the Micro SD port. The speaker will
automatically switch to SD card mode, indicated by a voice prompt, and
begin playing media on the drive.
2. Use the controls on the speaker to select and play audio from the
connected drive.
FM Radio
Radio Reception
An FM receiver is built into the speaker. Adjust the position of the speaker to
improve FM radio reception.
Radio Tuning and Saving Station Presets
1. Press the Source button to select FM Radio Mode, indicated by a voice
prompt.
2. Press and hold the button to scan radio stations automatically.
3. Press and hold the buttons to tune radio frequencies.
AUX IN DC IN
Charging the Battery
To charge the internal battery, plug the USB charging cable into the DC Power
Input on the speaker and a USB power adapter (not included) and standard power
outlet. Charging time is approximately 5 hours. Battery life is approximately 15
hours at 50% volume. Battery life can be extended by playing at lower volume
levels.
AUX IN DC IN
Bluetooth Wireless
Pairing & Playing Audio
When rst powered on, the speaker defaults to Bluetooth Mode, indicated by a
voice prompt.
1. Power ON the speaker by adjusting the Power Switch to the ON position.
The speaker defaults to Bluetooth Mode and is ready to pair automatically.
When pairing, remain within 3 feet of the Bluetooth device. the symbol
on the display will begin ashing, indicating it is ready to be paired.
2. Using the controls on your Bluetooth device, select ISB330 in the Bluetooth
Settings to pair. If need be, refer to the user’s manual for your specic device
for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected.”
The symbol will turn solid. Your Bluetooth device will now be heard
through the speaker.
4. Use the controls on the connected Bluetooth device to select and play
audio. Use the speaker controls or the connected Bluetooth device to play,
pause, and adjust the volume level.
5. After initial pairing, the speaker will automatically connect to the last
Bluetooth device used whenever it is in Bluetooth Mode. Note: If your
device should become unpaired or you nd it is unable to connect, press
& hold the button to enter to manually enter Pairing Mode. A voice will
announce, “Bluetooth is connecting,” and you can connect to the speaker
following the steps above..