Customer Support: 1-888-999-4215 9
Radio and Line In
1. Plug one end of a 3.5 mm audio input cable into
the Line In on the unit.
3.5 mm audio input cable not included.
Before use, disconnect any cables connected to the
Stereo RCA Inputs.
2. Plug the other end of the cable into the audio
output/headphone output on an MP3 Player or
other audio source.
3. Press the Power button to power the unit on.
4. Press the Source button repeatedly to enter
Aux/Line In Mode, indicated by a white light.
5. Audio played through the connected device will
now be heard through the speakers.
Using the Line In
1. Press the Source button repeatedly to enter FM
Radio Mode, indicated by a green light.
2. Press the Scan button on the remote.
3. The bar speaker will scan for all available
stations, and store them.
4. Press the Channel +/- buttons to browse
through stored stations.
Tuning the Radio
To Next Page
Loading...
