Customer Support: 1-888-999-4215
Quickstart Guide
Connecting the Wireless Subwoofer
1. With the soundbar and subwoofer powered ON, press and hold the Source/
Connect button on the soundbar until the Power LED begins flashing red.
2. Press the Connect button on the subwoofer until the Connect LED on the
subwoofer begins flashing.
3. The units are connected when both LEDs turn solid. When audio is played through
any source, the speaker will automatically use the connected subwoofer.
NOTE: To reduce unwanted vibration, try placing the subwoofer on a solid or padded
surface, such as the floor or carpet.
iLive | ITBSW397 v1824-01
DC IN
CONNECT
ON
OFF
OPTICAL IN SUB OUT RLAUX INLINE IN
DC IN
OPEN
2x AAA 1.5V
Power
On both the soundbar and the subwoofer, plug the power cord (included) into the DC
Input on the back of the unit and a standard wall outlet.
Remote Batteries
NOTE:
The power adapters
for the soundbar and
the subwoofer are NOT
interchangeable. Be sure
you have the correct
adapter before using.
To Next Page
Need help?
General
