10
Connecting to a Bluetooth Speaker
• Start by enabling Pairing Mode on the Bluetooth Speaker you want to use. Before beginning the pairing process,
be sure no other devices are connected to the speaker.
• On the turntable, turn Bluetooth Mode ON by adjusting the switch on the back of the unit.
• Press the Pair button on the turntable to begin pairing to your speaker. The indicator light on the turntable will
quickly flash blue while it attempts to connect to the speaker.
• When successfully paired, the indicator light on the turntable will turn solid. Note: If the turntable fails to
connect, the indicator light will keep flashing blue. Press the Pair button to try again.
• Audio from the record will now be heard through the connected speakers. Use the volume control on the
speakers to adjust the audio level.
To Next Page
Loading...
