3. Put the microwave oven into the cabinet.
make sure both sides of microwave walls
are equally arranged and installed to the
cabinet and the orientation must securely
hold the back of the microwave oven
4. After the position fixed ,then open the
door of the microwave oven and locate
the screw hole infront of the cavity.
Assemble the screw (M4 x 35mm) to
tighten the microwave oven to the
cabinet and cover the screw head with
the screw cover provided to finish the
last step
Attention:
100 mm
Attention:
Cabinet back and bottom should
keep a distance of not less than 100mm
as shown below for heat venting purpose
Screw hole
Screw (M4 x 35mm)
Screw Cover
To Next Page
Loading...