Webcam
User’s Guide for Model IWC220 v2558-01
Camera USB
Camera Lens
Overview & Features
Using the Camera Mount
1. Connect the camera USB plug into one of the USB 2.0 or 3.0 ports and the 3.5mm Audio Plug into the microphone input of
a powered on computer. Note: When using a laptop, it is not necessary to use the 3.5mm Audio Plug, only the camera USB
needs to be plugged in to operate the webcam.
2. The camera will automatically install itself and may require a few minutes before it is ready to be used.
3. Once the camera has nished installing, it is ready to be used. Note: To check if the camera is installed correctly, you may
check under: Control Panel> Hardware and Sound> Device Manager.
4. The webcam may be used with video applications, such as Skype, ZOOM, Google Hangout, etc.
Note: All video calling applications have an option to select what device you want to capture audio and video from. To
capture audio and video from this webcam select USB 2.0 camera. The audio and video will now be captured from the webcam.
3.5mm Audio Plug
1. To mount the webcam onto the
monitor of your computer, make
sure the front edge of the camera
mount and the monitor are ush.
2. Use the adjustable tail end
to secure the camera on
the back of the monitor, as
shown in the gure.
To Next Page
Need help?
General
