9
OPERATION INSTRUCTION
Please set the Thermostat or Humidistat to desired condition before
operating the fan. Use a screw driver to turn the arrow of the knob to
the desire temperature and humidity mark on the panel of the control
box. To avoid the possibility of overturning the fan, operate on a
stable, level surface. Do not move fan while it is in operation.
Product Specifications
MAINTENANCE AND CLEANING
WARNING: Parts replacement and troubleshooting to be performed
only by qualified personnel.
WARNING: Do not depend on any switch as the sole means of
disconnecting power when installing or servicing the fan. Failure to do
so may result in fatal electrical shock.
WARNING: Turn off the wall switch before servicing or cleaning.
To Next Page
Loading...