illy Y3.2 - Machine Status Indicators

36
EN
WARNING - MACHINE STATUS
Both buttons ash
The machine has been turned on and is in warm-up phase.
Steady on
The machine has reached the right temperature for brewing.
The espresso button is steady on
The machine is brewing one cup of espresso.
The brewed coee button is steady on
The machine is brewing one cup of Brewed coee.
Both buttons ash slowly
The machine is in Power Save phase. The machine activates the Power Save function after 15 minutes of inactivity. Press any button to turn the machine on again.
The buttons ash alternately
The machine needs to be descaled.
Flashing slowly (brewed coee button only)
The machine indicates that the descaling process has been selected. In this status the tank must contain the descaling solution.
Flashing quickly (brewed coee button only)
The machine indicates that the rst part of the descaling cycle is being performed. The machine is dispensing the descaling solution.
Flashing slowly (brewed coee button only) and the espresso coee button is steady on
The machine indicates that the rst part of the descaling cycle is complete. Rinse the water tank and ll it again with fresh drinking water.
Flashing quickly (brewed coee button only) and the espresso coee button is steady on
The machine indicates that the second part of the descaling cycle is being performed. The machine is dispensing water for rinsing cycle.
Flashing quickly (espresso coee button only)
There is a machine malfunction. Turn o the machine, wait for 30 seconds and then turn it on again. If the problem persists, contact an authorised service centre.