Important Information
1.4 Use for an Unauthorized Purpose
It is forbidden to use the pump for applications deviating from the technical data stated on
the type plate or the conditions stated in the supply contract, or to operate it with missing or
defective protective devices.
1.5 Safety Devices
Measures such as the following are for the safety of the operating personnel:
• electrical connection with a protective conductor (operating mode S1) and an earthing
plug,
• Motor protection switch (thermal) and
• “Hot Surface" label on the pump body (warning notice).
The diaphragm pump must not be operated without these elements.
1.6 Meaning of the Warning notes
Take note of the warning notices. They are in the following box:
CAUTION ! / WARNING !
Hazard which may lead to serious injuries or material damage.
1.7 Product Standards, Safety Regulations
ILMVAC Diaphragm Pumps meet the following product standards:
DIN EN 292-1, DIN EN 292-2 Safety of machines, basic terminology
DIN EN 1012-2 Compressors and vacuum pumps
DIN EN 60204-1 Electrical equipment of machines
EN 50110-1 (DIN VDE 0105-100) Operation of electrical installations.
The following additional safety regulations apply in the FR Germany:
BGV A2 Electrical equipment and operating materials
VBG 5 Power-driven machines
BGR 120 Guidelines for laboratories
BGI 798 BG hazard assessment in the laboratory
Observe the standards and regulations applying in your country when you use the dia-
phragm pumps.
4000722 5
To Next Page