How to fix no power on iLO CR320IL8 A CRT TV?
If your iLO CRT TV isn't turning on, ensure the power cord is securely plugged in. In the event of a power failure, unplug the power cord for 30 minutes to allow the unit to reset.
What to do if my iLO CRT TV has no picture or sound?
If your iLO CRT TV has no picture or sound, start by verifying that the power is on and the outlet connection is secure. Then, check the antenna or cable connection to the main unit, paying special attention to the wire condition if using an outside antenna. Try viewing other TV channels to rule out broadcasting station issues. As a last resort, turn off the power, wait a minute, and then turn it back on.
How to fix weak picture on iLO CR320IL8 A?
To fix a weak picture on your iLO CRT TV, first, check the antenna or cable connection to the unit. If you're using an outside antenna, verify the wire condition and connection. You can also adjust the 'CONTRAST' and 'BRIGHT' in the main menu. Finally, try viewing other TV channels to see if the issue is limited to a specific broadcast.
To Next Page
General